Ecotech-marine TIR Lens Manuel d'utilisateur télécharger pdf

TOOLS NEEDED:

Phillips screwdriver, 2.5mm &

3mm Allen keys and gloves

INSTALLATION

OF THE

TIR LENS

FOR THE

RADION XR30w

View the video at www.ecotechmarine.com/tirlens/

Installation of TIR lenses will increase

the light output from your Radion ﬁxture.

Overlighting your tank may cause damage

to inhabitants.

View the video at

www.ecotechmarine.com/tirlens/

610 954 8480

800 785 0338 (toll free)

888 500 2907 (fax)

INCLUDED IN TIR LENS KIT:

wire ties (2), TIR lens (2)

• Before starting this process, ensure that

your Radion XR30w is disconnected from its

power supply.

• Place the Radion on a soft surface to protect

the cover plate from scratches.

• EcoTech Marine recommends the use of gloves

during this process to prevent any fingerprints

from getting on the LED clusters. Fingerprints

could cause a decrease in light output.

• EcoTech Marine is not responsible for any

damage caused to the Radion, your aquarium

and its livestock, or your property as a result

of improper use of the TIR Lens Kit.

• Installation of the TIR Lens Kit will not affect

your existing warranty of the Radion XR30w.

STEP 3: REMOVE PHILLIPS LENS

SCREWS (2 FOR EACH LENS)

AND REMOVE LENSES.

STEP 7: REMOVE HEATSINK

SCREWS FROM HOUSING SIDE

WHERE WIRES CROSS (2).

STEP 4: REMOVE BOTTOM

PLATE USING NOTCH IN FAN AND A

SCREWDRIVER TO FACILITATE.

STEP 2: REMOVE PHILLIPS BOTTOM

PLATE SCREWS (4) AT OUTER CORNERS.

STEP 1: REMOVE PHILLIPS

FAN SCREWS (4) AND REMOVE FAN

GRILL ASSEMBLY (2 PIECES).

STEP 5: REMOVE

RUBBER GASKET.

STEP 6: REMOVE 2.5MM REFLECTOR

SCREWS (4) AND REMOVE REFLECTOR.

(Repeat this process for second reflector.)

You’ll need supplied

wire ties (2) and TIR lens (2)

to continue.

(Discard reflectors. Keep screws.)

XR695 TIR LENS KIT

1 2

TIR LENS 1
View the video at 2

Résumé du contenu

Page 1 - TIR LENS

TOOLS NEEDED: Phillips screwdriver, 2.5mm & 3mm Allen keys and glovesINSTALLATION OF THE TIR LENS FOR THE RADION XR30wView the video at www.ecote

Page 2 - View the video at

STEP 15: ALIGN FAN GRILL ASSEMBLY (2 PIECES) AND FASTEN PHILLIPS SCREWS (4) INTO FAN HOUSING.STEP 10: ENSURE LENS IS ALIGNED AND PLACE IT OVER CLU

Commentaires sur ces manuels

Pas de commentaire

Ecotech-marine TIR Lens Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Ecotech-marine TIR Lens. EcoTech Marine TIR Lens User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Ecotech-marine TIR Lens